1.The process is easy to operate, and the tool can be immersed in the working fluid, and then a chemical reaction can occur to form an effective protective film
2.The process does not contain organic solvents, and the formed protective layer is non-toxic and non-irritating, improving safety and environmental protection.
3.The protective layer hardly changes the contact resistance and solderability of the silver layer.
4.Short-time heat treatment (below 300 degrees) has little effect on the performance of the protective layer
1,The clean silver products put in solutions immersion for 1 mins.
2,Pick out and use the pure water cleaning for 1times.
Common problem and solve
||Watermark after protection and drying
||Strengthen water washing, wash with pure water and then dry
||Working fluid is cooled or left for a long time without layering
||Heat to 50 degrees to recover
|1,Always use pure water to make up for evaporation loss of working fluid
|2,Shake well before use. If the storage temperature is lower than 25 degrees, the eps will partially solidify, and heating to 40~50 degrees will return to normal
Package and delivery times
1L/Bottle avoid light, Keep cool and dry, air tight , warranty 2 years.
Samples production 1 days
Bulk order for 3 work day after received payment
Silver surface anti-sulfide and other anti-oxidation protection